Seite 1 von 2

Turbo cosworth project begins from Finland

BeitragVerfasst: 17. Feb 2018, 15:07
von EVO3 clone
HI,
Here are a few photos of the project.

Re: Turbo cosworth project begins from Finland

BeitragVerfasst: 17. Feb 2018, 17:14
von EVO3 clone
A few more pictures

Re: Turbo cosworth project begins from Finland

BeitragVerfasst: 17. Feb 2018, 21:53
von Henger
Hallo,

looks like one more nice 16V Projekt :biggrin:
Please some more good stuff :mrgreen:

Gruß Fränk

Re: Turbo cosworth project begins from Finland

BeitragVerfasst: 17. Feb 2018, 22:20
von EVO3 clone
hallo,

Mein Name ist Jari.
2.3-16 ist das Jahr 1986 und wir waren 6 Jahre alt.
und nun in einen Turbo-Rennwagen verwandelt. Aber ein Laufsteg.
Entschuldigung schlechte deutsche Sprache ..
Fotos des Projekts sind genug.

Re: Turbo cosworth project begins from Finland

BeitragVerfasst: 18. Feb 2018, 09:59
von EVO3 clone
engine with new parts

Re: Turbo cosworth project begins from Finland

BeitragVerfasst: 19. Feb 2018, 20:20
von EVO3 clone
Add the engine tuning

Re: Turbo cosworth project begins from Finland

BeitragVerfasst: 19. Feb 2018, 21:26
von Stern1
:super :super

Re: Turbo cosworth project begins from Finland

BeitragVerfasst: 20. Feb 2018, 21:31
von EVO3 clone
danke! :winken: :winken:

Re: Turbo cosworth project begins from Finland

BeitragVerfasst: 22. Feb 2018, 18:16
von EVO3 clone
Bosch Fuel injectors 1700 ml/min. NUKE Fuel rail. ARP Head stud kit.

Re: Turbo cosworth project begins from Finland

BeitragVerfasst: 22. Feb 2018, 18:31
von EVO3 clone
Turbo manifold. Oil cooler. a new charger rack.

Re: Turbo cosworth project begins from Finland

BeitragVerfasst: 23. Feb 2018, 07:59
von EVO3 clone
EVO3 clone hat geschrieben:Turbo manifold. Oil cooler. a new Alternator rack.

Re: Turbo cosworth project begins from Finland

BeitragVerfasst: 23. Feb 2018, 21:35
von 16vau
Schöne Arbeit :super

Re: Turbo cosworth project begins from Finland

BeitragVerfasst: 24. Feb 2018, 20:48
von EVO3 clone
danke! :winken: :winken:

something got in place:
BMC free flow filter, Camshaft sensor, Triggeri sensor

Re: Turbo cosworth project begins from Finland

BeitragVerfasst: 2. Mär 2018, 18:07
von EVO3 clone
Bosch 2 x 044 fuel pump, Nuke Fuel rail, Vibrant Mufler and new V-belt pulley.

Re: Turbo cosworth project begins from Finland

BeitragVerfasst: 2. Mär 2018, 18:18
von EVO3 clone
Soundcheck

Alastaro Circuit 01/10/2016 - Mercedes Benz 190E 2.3 16V Cosworth Turbo SOUNDS:

https://www.youtube.com/watch?v=XnDVEY5H7gY

Re: Turbo cosworth project begins from Finland

BeitragVerfasst: 12. Mär 2018, 20:37
von EVO3 clone
front and rear suspension, new bushes:

Re: Turbo cosworth project begins from Finland

BeitragVerfasst: 13. Mär 2018, 04:27
von Nagilum
I'm missing +1 buttons on this old forum. :/

Really interesting and nice conversion.

What did you do to the rear axle differential? You don't keep the original, do you?
The small W201 one sadly doesn't last much more torque than series and my car is "eating" them.
I thought about replacing it with a bigger one from W124, but that doesn't fit easily.

Regards
- Nagi

Re: Turbo cosworth project begins from Finland

BeitragVerfasst: 14. Mär 2018, 18:13
von EVO3 clone
rear axle is the original.
new parts are serviced.
At the moment, the W124 rear Axel is not an option for us

Re: Turbo cosworth project begins from Finland

BeitragVerfasst: 14. Mär 2018, 21:01
von Nagilum
So I'm curious how long it will last with your setup.

Re: Turbo cosworth project begins from Finland

BeitragVerfasst: 14. Mär 2018, 23:11
von Steffen102992
Hey, what's in the small box with the orange Sticker?
Don't tell me that good old "Sturaco" is available again? :shock:

And BTW..... Fantastic work..... It's a joy to see you guys having fun with good old W201!
Keep on working! Respect! :danke