Projekt 2.5-16v,

Mein Baby
ich stelle mich mal vor..

Moderator: Moderator

Re: Projekt 2.5-16v,

Beitragvon JM Motorsport » 3. Apr 2013, 19:07

I keep working to be able to come to Hockenheim, last time we visited was in 2007 :(

Anyway, i left the car at the paintshop yesterday, hopefully it will be ready soon.

We put the car on a trailer to transport it to the paintshop. On the way to the paintshop we weighed the trailer and car together will all parts that we removed before painting. The only thing that is missing are the fibreglass bumpers, which weigh 9 kg.

Total weight together with trailer was:

1480 KG, trailer should weigh around 400kg. So hopefully we are below 1100 kg. Will weigh it again when i have put everything back together as well to check.
Bild

Next time it will be freshly painted
Bild
Gruß
- Mikael Lindqvist

Bild
JM Motorsport
maxi Ventiler
maxi Ventiler
 
Beiträge: 431
Bilder: 0
Registriert: 11. Jul 2006, 11:04
Wohnort: Göteborg, Schweden
Autos: 2.5-16v Evo 1 Umbau, CLK 230 Kompressor

Re: Projekt 2.5-16v,

Beitragvon shaq » 4. Apr 2013, 10:01

It looks awesome and fascinates me how you managed to reduce weight of the car! :schraub

Have you measured what happened to weight balance ratio front axle / rear axle after installing carbon parts?

Looking forward to meet you at the HH event.

shaq
Mitglied im 190E-16V Club e.V.
Bild

Team-Moderation des w201-16v.de Forum
Bild

"Mit dem Evolutions-Mercedes kann man so spät bremsen, da würde Ich mit meinem 2.3er schon langst im Wald liegen"
Ein DTM Fahrer nach erste Rennen mit dem EVO1
Benutzeravatar
shaq
Moderator
Moderator
 
Beiträge: 856
Registriert: 17. Apr 2008, 09:19
Wohnort: Mannheim
Autos: ...
190 8v: 2.0 Signalrot/Sonnenbeige Final Edition 1990
190E 8v: 1.8 Avantgarde Rosso und 2.3 DTM '92
190E 2.3 16v ECE x 2 1985
190E 2.5 16 Flachschieber EFI
190E 2.5 16 Mosselman Turbo EFI
190E Evo1 Projekt Rennkarosse

Re: Projekt 2.5-16v,

Beitragvon JM Motorsport » 4. Apr 2013, 10:48

Hi no not yet, i will need to do a proper corner weight. I wont be all done by HH, but i will come anyway. I would have hoped i would able to move the battery to the rear but there is simply no time.

Last year the rear end felt nervous, hopefully a new 4 wheel alignment will take care of this, and i will lower the car a bit more. Second problem is that i wont be able to adjust the rear or front end as i would like to since don't have installed adjustable struts or top mounts. That is next on the list for next season.

I talked to Henrik Rosengren (The swedish collector of 190 DTM cars) about wheel alignment, and he gave me some useful advice. One was to lower the car even further on the rear axle and then do a new alignment, he gave me me measurements to try
Gruß
- Mikael Lindqvist

Bild
JM Motorsport
maxi Ventiler
maxi Ventiler
 
Beiträge: 431
Bilder: 0
Registriert: 11. Jul 2006, 11:04
Wohnort: Göteborg, Schweden
Autos: 2.5-16v Evo 1 Umbau, CLK 230 Kompressor

Re: Projekt 2.5-16v,

Beitragvon JM Motorsport » 28. Apr 2013, 19:01

We are doing the final preparations for Hockenheim now. Bumpers will be send off for painting, final tweaks to Efi to get it running properly, fitting the Power Pack exhaust and then a wheel alignment. Plus a extra feature which i will not reveal until Hockenheim.

I found the olde style wiper mechanism, fitted and weighs almost 4kg less then the later model.

Bild

Works fine, but i would need the proper coverings around the wiper.
Bild

About 1 year ago borrowed some parts from my friend Erics ex Kärcher Evo 2. These are the quick fit bumper system:

The yellow cones can be seen in this pictures, they were made of KEvlar
Bild

This is one of the parts i borrowed from Erics car
Bild


Moulds are being made
Bild

This is the inside of the bumper where the cone will fit
Bild

Bild

Bild

Here is the rear bumper
Bild

Here is the front bumper fitted, the quick fasteners are turned 45 degrees and the bumper can then be taken off as one part. Very light
Bild

Bumper has been removed
Bild

Both bumpers before paint:
Bild

We also fitted the fasteners for the carbon fibre bonnet:
Bild
Gruß
- Mikael Lindqvist

Bild
JM Motorsport
maxi Ventiler
maxi Ventiler
 
Beiträge: 431
Bilder: 0
Registriert: 11. Jul 2006, 11:04
Wohnort: Göteborg, Schweden
Autos: 2.5-16v Evo 1 Umbau, CLK 230 Kompressor

Re: Projekt 2.5-16v,

Beitragvon db16v » 28. Apr 2013, 22:11

Wow. Sieht echt klasse aus.
Bin schon gespannt mir das live anzuschauen. :shock:

Gruß Thomas
Mitglied im 190E-16V Club e.V.
Bild

Team-Moderation des w201-16v.de Forum
Bild

Mein 2,5-16 Pick up
Projekt Rennwagen
Benutzeravatar
db16v
Moderator
Moderator
 
Beiträge: 2576
Bilder: 9
Registriert: 16. Sep 2005, 19:58
Wohnort: Tecklenburg
Autos: 190E Rundstrecke, 300E Pick Up, S203 C30, 2,5-16

Re: Projekt 2.5-16v,

Beitragvon JM Motorsport » 10. Mai 2013, 20:58

Nur noch 9 tage! Aber das wetter sieht nicht gut aus :(

Was hat hier passiert :twisted: :schalt

Bild
Gruß
- Mikael Lindqvist

Bild
JM Motorsport
maxi Ventiler
maxi Ventiler
 
Beiträge: 431
Bilder: 0
Registriert: 11. Jul 2006, 11:04
Wohnort: Göteborg, Schweden
Autos: 2.5-16v Evo 1 Umbau, CLK 230 Kompressor

Re: Projekt 2.5-16v,

Beitragvon Henger » 10. Mai 2013, 23:11

JM Motorsport hat geschrieben:Nur noch 9 tage! Aber das wetter sieht nicht gut aus :(


Hi Mikael

Das mit dem Wetter wird bestimmt noch, auf die derzeitige Vorhersage kann man sich noch nicht verlassen.
Auf deine neue Beklebung bin ich jetzt schon gespannt :-D

Netten Gruß

Fränk
Mitglied im 190E-16V Club e.V.
Bild

Team-Moderation des w201-16v.de Forum
Bild

"16V Fahren, ich kann jederzeit damit aufhören, ährlisch"

Wenn die letzte Tankstelle schließt, wird Euch auffallen,
daß Greenpeace nachts kein Bier verkauft.
Benutzeravatar
Henger
Administrator
Administrator
 
Beiträge: 11713
Bilder: 26
Registriert: 2. Sep 2005, 20:56
Wohnort: Zweibrücken RH. Pfalz
Autos: 2.5-16V EFI Bj.11/88 Erna

Re: Projekt 2.5-16v,

Beitragvon JM Motorsport » 17. Mai 2013, 19:15

Jetzt fahren wir!
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
Gruß
- Mikael Lindqvist

Bild
JM Motorsport
maxi Ventiler
maxi Ventiler
 
Beiträge: 431
Bilder: 0
Registriert: 11. Jul 2006, 11:04
Wohnort: Göteborg, Schweden
Autos: 2.5-16v Evo 1 Umbau, CLK 230 Kompressor

Re: Projekt 2.5-16v,

Beitragvon 16vau » 17. Mai 2013, 21:41

Endgeil :thumbright:

Gruß Norbert
Mitglied im 190E-16V Club e.V.
Bild
Benutzeravatar
16vau
hyper-ventilator
hyper-ventilator
 
Beiträge: 952
Registriert: 22. Dez 2006, 20:49
Wohnort: Allgäu
Autos: 2.5-16 und 2.5-16 Evolution

Re: Projekt 2.5-16v,

Beitragvon Ändy » 17. Mai 2013, 22:05

Gute Reise und fahrt vorsichtig

man sieht sich dann :schalt
Mitglied im 190E-16V Club e.V.
Bild
Benutzeravatar
Ändy
maxi Ventiler
maxi Ventiler
 
Beiträge: 574
Registriert: 19. Feb 2008, 19:21
Wohnort: Bonn
Autos: 190E 2,5-16V, W210 E430 Limo

Re: Projekt 2.5-16v,

Beitragvon JM Motorsport » 14. Aug 2013, 20:40

Took a few pictures of the car today, waiting for two Recaro Pole Position to replace my Sparco and the original seats.

Bild

Bild

Bild

Bild

Bild

Bild
Gruß
- Mikael Lindqvist

Bild
JM Motorsport
maxi Ventiler
maxi Ventiler
 
Beiträge: 431
Bilder: 0
Registriert: 11. Jul 2006, 11:04
Wohnort: Göteborg, Schweden
Autos: 2.5-16v Evo 1 Umbau, CLK 230 Kompressor

Re: Projekt 2.5-16v,

Beitragvon Nagilum » 14. Aug 2013, 21:07

A really nice car!

Regards
- Nagi
"Verbreitet ist die Bezeichnung Freund, doch selten ist die Treue."
- Phaedrus, Fabeln
Nagilum
hyper-ventilator
hyper-ventilator
 
Beiträge: 5088
Registriert: 12. Sep 2006, 02:48
Wohnort: BOR
Autos: 190E 2.5-16

Re: Projekt 2.5-16v,

Beitragvon Henger » 14. Aug 2013, 21:42

Schöner Wagen, top Kulisse :thumbright:

Gruß Fränk
Mitglied im 190E-16V Club e.V.
Bild

Team-Moderation des w201-16v.de Forum
Bild

"16V Fahren, ich kann jederzeit damit aufhören, ährlisch"

Wenn die letzte Tankstelle schließt, wird Euch auffallen,
daß Greenpeace nachts kein Bier verkauft.
Benutzeravatar
Henger
Administrator
Administrator
 
Beiträge: 11713
Bilder: 26
Registriert: 2. Sep 2005, 20:56
Wohnort: Zweibrücken RH. Pfalz
Autos: 2.5-16V EFI Bj.11/88 Erna

Re: Projekt 2.5-16v,

Beitragvon fisch007 » 15. Aug 2013, 07:46

nice absolutely nice pic, an backdrop
Mitglied im 190E-16V Club e.V.
Bild


W124 320CE zum Cruisen
W201 EvoII fürn Spaß
Benutzeravatar
fisch007
hyper-ventilator
hyper-ventilator
 
Beiträge: 1037
Registriert: 10. Sep 2005, 18:23
Wohnort: Baden Würtemberg aber mehr Baden
Autos: W124 320CE zu Cruisen
W201 190E 2.5 16V EvoII zu Spaß haben

Re: Projekt 2.5-16v,

Beitragvon 16vau » 15. Aug 2013, 13:40

awesome car

Gruß Norbert
Mitglied im 190E-16V Club e.V.
Bild
Benutzeravatar
16vau
hyper-ventilator
hyper-ventilator
 
Beiträge: 952
Registriert: 22. Dez 2006, 20:49
Wohnort: Allgäu
Autos: 2.5-16 und 2.5-16 Evolution

Re: Projekt 2.5-16v,

Beitragvon Mclaren3112 » 26. Aug 2013, 15:10

nice nice nice :-D was haben die Felgen jetzt für eine ET und mit welcher dimmension der Reifen und distanzscheiben sind die letzten bilder gemacht worden???
Benutzeravatar
Mclaren3112
20 Ventiler
20 Ventiler
 
Beiträge: 20
Registriert: 22. Aug 2013, 14:22
Autos: Mercedes w201 2,6

Re: Projekt 2.5-16v,

Beitragvon Christhunter » 26. Aug 2013, 16:06

Mich interessiert, wie so häufig, wieder nur das Gewicht der Räder :-D
viewtopic.php?f=15&t=7558 Vorstellung meiner Autos
Benutzeravatar
Christhunter
maxi Ventiler
maxi Ventiler
 
Beiträge: 503
Bilder: 0
Registriert: 6. Jun 2010, 17:50
Wohnort: Osnabrück

Re: Projekt 2.5-16v,

Beitragvon marceldeijkers » 30. Aug 2013, 16:48

Very nice!
Stoppuhr, laptimer stopwatch ? Ich machen das fur ihne! http://www.marceldeijkers.nl
Aussentemperatureanzeige ATA kaput? Ich kann er machen!: Mercedes ATA reparatur
Benutzeravatar
marceldeijkers
maxi Ventiler
maxi Ventiler
 
Beiträge: 324
Registriert: 29. Okt 2008, 21:59
Wohnort: helmond

Re: Projekt 2.5-16v,

Beitragvon partyboy » 7. Okt 2013, 02:26

Spectacular !!!
Mfg, Nando.
partyboy
150 Ventiler
150 Ventiler
 
Beiträge: 177
Registriert: 2. Jul 2009, 23:40
Wohnort: Santander

Re: Projekt 2.5-16v,

Beitragvon Benjoo #1 » 11. Okt 2013, 11:20

Way too beautiful to drive it ;)
Benjoo #1
 
Beiträge: 13
Registriert: 12. Dez 2010, 15:51
Autos: W201 2.0 sportline

VorherigeNächste

Zurück zu 14, 15, 16..meiner und ich

Wer ist online?

Mitglieder in diesem Forum: Google [Bot] und 12 Gäste