Seite 1 von 1

KE Jetronic Experts In The UK?

BeitragVerfasst: 26. Nov 2017, 23:15
von London-16V
Hello friends,

Does anyone know of any KE Jetronic experts on the UK?
My idle is around 1100rpm...and the car lacks power. I have a 1990 2.5-16 non-cat.

I disconnected the idle valve and started the car and the idle was 800rpm and steady! But after a few mins went to 1500rpm. So i think the valve is ok.

But in normal circumstances with idle valve connected, i have 1100rpm and sluggish boring to drive engine!!! :Whaat: :Whaat: :Whaat:

Re: KE Jetronic Experts In The UK?

BeitragVerfasst: 27. Nov 2017, 12:59
von London-16V
Anybody had any experience with this company?

http://www.vaeth.com/index.php?lang=de

Re: KE Jetronic Experts In The UK?

BeitragVerfasst: 2. Dez 2017, 16:22
von Olli230.6
Hello,
if you are searching for a guy who knows really the KE in the 2,3-16V, 2,5-16V and EVO , powerpacks..... at all
you may ask :
Dieter Braun Motorenbau, 71729 Benningen -Germany
he is a former AMG- member and made the motors there for the german DTM racing series.
its difficult to make any diagnostic if you dont´t have the car in hands.
KE is complex, and there can be a few errors responsible for the same problem....
may be he knows a english guy who have the same kwowledge of these things , good luck
Cheers

Olli

Re: KE Jetronic Experts In The UK?

BeitragVerfasst: 5. Dez 2017, 00:47
von Steffen102992
Or ask Geert at ferrari400parts.com
But his company is in the Netherlands.

He did an overhaul for me... (KE Distributor Block)