190d widebody with bbs lemans

[190Benz]

Hi! I'm Niels and i'm a 22 year old from Belgium.
I drive a 1990 190d.
Here is the modlist:

Exterior:
-Rieger evo3 widebodykit fully welded in to the body
-Rieger rear window spoiler
-Rieger trunk spoiler
-Homemade bad look hood
-Shace antenna
-Black mesh in the bumpers
-Powersprint exhaust
-Mercedes 197 obsidian schwarz (2007)
-Everything painted on the car
-Tinted windows (15% in the back)
-MHW black taillights
-Depo clear headlights and side markers with chrome insides
-Chrome license plate holder
-Green underbody neon
-Phillips lightbulbs
-Bmw e36 foglights
-Locks and a lot of screws polished
-Avantgarde grill

Rims and lowering
-BBS le mans front = 18x8,5 et40 back = 18x10 et0
-Dunlop SP9000 front = 235/40zr18 back= 265/35zr18
-#3rubbers in the back #4rubbers in front
-Vmaxx verlaging -4cm

ICE
-Sony CDX-CA900 Hu
-Pioneer compos in front
-15" mtx sub in the trunk with self made box
-2 mtx 6933 in the rear deck
-mtx amp on the rear deck

Interior
-Leather plate around the shifter
-Black leather EVOII seats
-Mercedes star and mercedes benz logo floormats
-Amg pedals
-Green neon
-Chrome rings around the gauges
-Chrome rings around the thermostat
-Chrome wheelhub from Sracing
-Isota evoluzione steering wheel
-Isota chrome and leather gear shifter.

To come:
-16v console with 7" wide screen
-EvoII front and rear bumpers
-Polished BBS rims
-Tuned 16v engine an bigger brakes once the car becomes an old timer
-...




This is the story of my 1990 190d. I bought it in a bad shape like 3 or 4 years ago.
I wanted a 16v but my dad wouldn't let me buy one because it was to fast.
So i bought a diesel for 1600€.



The car was driven from the dealer to my house and the next day i was already screwing every body part of it an checked for rust. We fixed the dent left of the trunk removed the antenna and welded an angry look to the hood and removed the towing hook.



Then i ordered a Rieger evo3 widebodykit with the Infinity trunk spoiler and rear window spoiler.



It took like half a month to install the bodykit. The rieger widebody kit his quality sucks



Then came a set of 17 inch amg monoblocks and we renewed the disk brakes and widened the rear innerwheelwell.



Then i got the car and things like the doorhandles and window trims painted obsidian schwarz (2004) and installed a powersprint exhaust.



The result:



A picture from back in the days



Then i polished the lip on the amg rims and intalled a avantgarde grill and black taillights.



Here you can see the chrome inside of the headlights.



Then i repainted the car in the 2007 obsidian schwarz wich has a green shine it. The 2004 obsidian schwarz has a gold metalic in it.
I also bought a set of BBS le mans rims. I love them



And this year i had a photoshoot for the mercedes-tuner magazine.
Here are some pics of it. I'll upload the pages of the magazine once the new issue is out.

[Nagilum]

Welcome to our board.

Even if I'm not a fan of the Riger-Stuff, I have to say: The car looks fine and I like "Obsidian Schwarz" and also the BBS rims it looks like a "round" thing.

Btw. Rieger is well known for it's f*cking work to get it on the car.

Now it's time to get at least a (slow ) 2.5 Turbodiesel and modify/exchange the turbo, if can't get a 16V, to give it the power which it looks like.

Regards
- Nagi

[LUDE]

Hello and wellcome to our board!

At first I have a question....
I have read the Mercedes Tuner, especiallythe article of your car.
I would like to know what kind of diesel engine you have.
In the technical facts the wrote 2,2Liters.....????

I didn`t know, that this engine was made in a 190E....not in europe!

So your car looks good, but I don`t like the Rieger-bodykit.
But I must say you did the fitting very well.
Not every EVO III is so good processed.

Redspect for your work!
I have heard many stories about the bad exactness of Riger-parts.
And you must had a lot of work, for this result!

[190Benz]

Welcome to our board.

Even if I'm not a fan of the Riger-Stuff, I have to say: The car looks fine and I like "Obsidian Schwarz" and also the BBS rims it looks like a "round" thing.

Btw. Rieger is well known for it's f*cking work to get it on the car.

Now it's time to get at least a (slow ) 2.5 Turbodiesel and modify/exchange the turbo, if can't get a 16V, to give it the power which it looks like.

Regards
- Nagi

I have this waiting in my garage




Also a stock hood is waiting to be painted.

These are also waiting for the stock hood to be installed



With this in the fog ligths... bi-xenon is on the way for the regular lights.



And maybe a new exhaust system.



The problem with the engine is that every year i have to go to a technical check-up because my car isn't an old timer.
When your car is an old timer in belgium you only have to go once and that's it. In Belgium you can't get you car trough the technical check-up with an other engine in it then it is registered to.

[Nagilum]

...so change the registration?

[190Benz]

Hello and wellcome to our board!

At first I have a question....
I have read the Mercedes Tuner, especiallythe article of your car.
I would like to know what kind of diesel engine you have.
In the technical facts the wrote 2,2Liters.....????

I didn`t know, that this engine was made in a 190E....not in europe!

So your car looks good, but I don`t like the Rieger-bodykit.
But I must say you did the fitting very well.
Not every EVO III is so good processed.

Redspect for your work!
I have heard many stories about the bad exactness of Riger-parts.
And you must had a lot of work, for this result!

Yeah the rieger kit was a bitch to instal
The 2,2liters is a mistake. I asked my dad the correct cc of my engine and he told me 2,2 but on paper it is a 1,997. He once mesured it in my brothers 200d w124
I looked it up and all 2 liter diesels are 1,997. So it's a mistake i guess.

[190Benz]

...so change the registration?

Isn't posibla to get your car homolagated your car has do undergo a crash test

It's easyers in germany and the netherlands.

[Henger]

Hallo Niels,

willkommen im Forum

Du hast dir wirklich viel Arbeit mit deinem 190er gemacht "Respekt"

Mir gefällt auch das Obsidanschwarz sehr gut.
Alles wirkt sehr passgenau und sauber verarbeitet, wenn gleich ein Riegerumbau immer Geschmacksache bleibt.
Wünsche dir viel Spass und Infos hier im Forum genau wie mit deinem Auto.

Gruß Fränk

[max190]

Today I saw your picture in the german "Rieger Catalogue".
Your picture represents the EVO III Body Kit!

The BBS Le Mans--- perfect!

[190Benz]

Today I saw your picture in the german "Rieger Catalogue".
Your picture represents the EVO III Body Kit!

The BBS Le Mans--- perfect!

Really? They never asked me if they could use my pictures

Can you make a picture or a scan of it?

[max190]

For sure!

[max190]

Hey Niels...

here are the pictures!
These picture are in the current catalogue from Rieger!
Tomorrow I could post the price!











And they don`t ask you if they could use this pictures?!

[Dennis190D]

Nicht schlecht für einen Diesel Freut mich, dass ich nicht der einzige Diesel-Spinner bin

Keep on Cruising

Bye Dennis

[190Benz]

No they didn't ask me a thing.
I just mailed them that it is inpolite and very unproper to just use pictures of my car to make money for them withou even thanking me.

The guys of the mercedes-tuner magazine thanked me and gave me 1 copy of the issue that was out then and when the issue came out with my car in it they sended me 9 issues of the magazine and a cd-rom with the pictures on it.

[Maki]

@190Benz -welcome to the club

I have the same problem for many years now that people and companys are using pics from my car for there buisness

Bye
Maki